Bidri Craft

 

Origin of the craft

Bidri craft gets its name from the Bidar district of Karnataka. The craft originated in Persia and came to India in the 14^th century, flourishing in Bidar under the Bahamani Dynasty. While in Persia, gold and silver was inlayed on steel or copper, in Bidri work, zinc is the primary metal used.

State(s) it is practiced in

Karnataka

About the craft

Bidri craft has obtained the ‘Geographical Indication’ tag to certify that it can be made only in Bidar. The significance of the craft lies not only in its beauty, history and production technique, but also in a special ingredient- the soil from the Bidar Fort. This black soil is an important input for Bidri work as it has special chemical properties; the soil has been away from sunlight and rain for hundreds of years and is used as an oxidizing agent.

No one really knows what makes this soil unique. Our Bidri craftsmen have varied theories– one suggested that back in the Sultans’ days, copper coins were made in a section of the Fort. Powdered metal seeped down to the soil, giving it its oxidizing property over the years. Another artisan claims it is because weapons were stored underground in the fort.

An interesting article in the Deccan Herald covers the Bidri craft: http://www.deccanherald.com/content/178987/no-shine-artisans.html

Input materials

Zinc, Copper, Silver, Soil from Bidar Fort, Ammonium chloride

Process

Casting the alloy: A mix of soil, castor oil and resin is used to prepare a mould. In this, molten metal alloy of zinc and copper (in the ratio of 16:1) is poured. Depending on the product design, different metal casting may need to be welded together to form one single product.

Buffing: The rough surface is filed to smoothen it.

Drawing the design: Copper sulphate is applied on the shiny surface, which causes it to become temporarily black in colour. This makes it easy for the craftsman to draw the designs clearly on the black surface. The design is etched using a metal stylus.

Engraving the design: Craftsmen then use a chisel to carve out this design.

 

Inlaying: Inlay work is of two types - sheet work or wire work, depending on the design. Sheets or wires of pure silver are meticulously hammered into the grooves of the engraved design.

The silver is hammered in and the surface is buffed and smoothened to remove the extra silver jutting out.

 

After complete filing of the product, the temporary black coating is lost and the entire surface turns white again. The silver inlay work is hardly visible at this point.

Oxidizing:
The oxidizing process is very unique to Bidri craft. The soil from the Bidar Fort is mixed with ammonium chloride and boiling water to form a solution.

When this solution is applied to the product surface, the zinc-copper alloy turns jet black, while the silver is unaffected. This black colour is permanent and does not fade.

The end product is striking silver against a black background. 

Caring for the Product

The silver should not come into prolonged contact with water. In case the silver dulls, use silver polish (such as Silvo) to restore the shine. Also, gently smear coconut oil to give a shine to your Bidri product.

Problems plaguing artisans

Rising cost of raw materials: Price of silver has almost tripled in the past 2 years. Increasing the selling price accordingly has seen reducing demand from customers. The Karnataka State Handicrafts Development Corporation provides assistance to Bidri craftsmen through subsidy on a limited quantity of raw materials.

Also, rising labour cost has increased the cost of welding product castings.

Lohar Shilp~ Wrought Iron

Origin of the craft

The wrought iron craft of Chhattisgarh is centuries old and was practiced by the Muria tribes. Wrought iron was traditionally used by the tribal people to make tools such as ploughs, knives, axes and also candleholders. While their ancestors themselves extracted the iron from the ores, todays artisans use recycled scrap iron.
Over the past few decades, the artisans have adapted to the urban market demand and their traditional craft has adopted newer designs and products. The products depict typical village scenes and lifestyle.

About the artisans 
The artisans belong to the Lohar (blacksmith) community in Chhattisgarh’s Bastar district

State(s) it is practiced in

Chhattisgarh (While wrought iron handicrafts are found in many states in India, notably Uttar Pradesh, Chhattisgarh’s is the more traditional tribal craft)

Input materials

Iron from the rich ore mines of Chhattisgarh/Recycled scrap iron, Red oxide, Chalkboard paint

Process

First, the iron sheets are cut into smaller strips and a coal furnace is prepared.

 

The iron is made malleable by heating it in the coal furnace, and then beating it over a metal anvil using a hammer and tongs.

 

This heating and beating process is repeated until the sheet takes the intended shape. The artisans work tediously in the heat, first creating the shape and then finely detailing the product. (This forging process usually halts around noon as it becomes unbearably hot for the artisans to work due to the heat from the furnace and the asbestos roof.)
It’s a rather tedious process; for example, forging the flat peacock outline below took around 20-30 minutes of heating and hammering.

             

Each product is entirely handmade and no machines are used in the process. The fine craftsmanship is evident as each figurine is created from a single sheet and has no joints. Decorative additions such as clothing/adornments for the figurines are made separately and attached to the product without using any welding technique or machinery. Finally, a coating of red oxide is applied to prevent rusting and then a coating of chalkboard paint is applied for lustre.

Caring for the Product

Avoid contact with water and wipe the product with dry cloth. You can smear mustard oil/coconut oil over the product for lustre and to avoid rusting.

Problems plaguing artisans

Marketing their products can be a challenge for smaller artisans, as they stay in the interiors of Chhattisgarh (around 300kms from the state capital, Raipur) and may not have much exposure to the outside world. Transportation of products can be a tedious task as they often have to travel to Raipur and back to courier products.

Dhokra Craft (Bell Metal)

  

Origin of the craft

The Dhokra craft uses the elaborate Lost Wax method of casting metal, which can be traced back 4500 years to the ancient city of Mohenjodaro in the Indus valley civilization. The Lost wax method is said to be the oldest technique of casting metal.

Dhokra craft gets its name from the Dhokra Damar tribe, who are established metal smiths of West Bengal. From West Bengal, the Dhokra work spread to tribal areas in nearby metal-rich states. Dhokra is now found in many regions in India, each region carrying a distinct look.

State(s) it is practiced in

West Bengal, Chhattisgarh, Orissa, Andhra Pradesh, Jharkhand

About the craft

The exquisitely handcrafted Dhokra products involve a tedious process of designing and metal casting. Each piece is unique as one mould can only be used for one product.

Input materials

Soil from the riverbed, Black soil from the fields, Red soil from termite bills, Rice husk, Wax (Beeswax or Paraffin wax)/Resin, Bell metal. The metal proportions used in the alloy and other inputs vary slightly from region to region.

Process

Mould making: The base mould of the product is prepared from a mix of black soil, rice husk and water.

 

Surface Preparation: Once this base dries, it is covered in fine soil from the riverbed. Emery paper is used to smoothen the mould surface.

Designing: Over this, strips of beeswax or resin are applied to make the designs on the product. This is an arduous process of fine detailing. 

                                

Wax or resin is used since it is malleable and ductile. Artisans in different regions use different wax/resin. To reduce cost of wax, some artisans use paraffin wax mixed with coal tar and dhoop (incense).

For making the threads, the wax is first pounded well.

The wax is then pressed through a container. Attached at one end of the container is a metal plate with holes punched in it. This allows the wax strings to be formed in the required shape and size.

  

The apparatus and metal plates are similar to the ones used for making Chakli's in Indian homes.

Each plate has different shapes punched in it, depending on the artisan's design requirements.

 

First Layering: After the wax designs are allowed to dry, the product is covered with a mix of coal powder, river soil and water. This layer is pressed onto the wax and hence the design is imprinted onto it. This is allowed to dry. Each new layer is set to dry for around 2-3 hours. Vents are created in the mould, so that the wax can later melt away through it.

                    

Second Layering: Another layer of fine river soil is applied and is left to dry.                                           

                             

Third Layering: Once dry, another layer- a mix of red soil (from termite bills) and rice husk is applied. Larger products have more/bigger vents so that wax and air escapes.

Firing: The product is put in the furnace and the wax melts away, leaving a cavity. The product is taken out of the furnace and is turned upside down. Bell metal (an alloy of copper and tin, usually mixed in ratio of 3:1) is heated at 1200-1300 degrees and then this molten metal is poured in to the cavity to replace the wax. This process is to be done with great care to ensure that no air bubbles are formed while pouring the metal.

A video by master craftsman Sushil Sakhuja captures the firing process: http://www.youtube.com/watch?v=6qREtAv9hwo

The product is set aside to cool down. Water is sprinkled over it and then the outer mould is hammered to reveal the metal.

Filing: The filing of the metal surface can take a few hours or a day, depending on the size and design of the product. To give a better finish to the products, many artisans are now also buffing the products.

Note: Dhokra products can be hollow or solid. The above process describes the hollow casting method. Incase of solid casting, instead of a clay mould, wax is used. Hence, during the firing process, a lot more molten metal is used to replaces the wax. The traditional method of casting is the hollow casting using the clay mould.

Caring for the Product

The products turn slightly black over a few years. Apply Brasso to retain the colour and shine.

Problems plaguing artisans

Rising raw material prices is a big challenge being faced by the artisans. High investment in metal and other inputs increases their working capital requirements. Some artisans are experimenting with different materials to bring down costs; such as replacing beeswax with paraffin wax mixed with tar.

Warli Craft

Origin of the craft

Warli painting is an ancient tribal craft of India that is said to date back to 10th century A.D. or earlier. The Warli paintings bear a striking resemblance to the pre-historic cave paintings, especially those in Bhimbetka, Madhya Pradesh.

Traditionally, Warli paintings were done on special occasions/rituals by women on the walls of their home. Until the 1970s, the Warli craft was not much known outside the villages where it is practiced. In the ‘70s, the Indian Government and a prominent tribal artist- Jivya Soma Mashe brought the craft to the fore in the national and international markets.  Today, for commercial purpose these paintings are also done on cloth, paper and wood in newer colours by both, men and women.

State(s) it is practiced in

Maharashtra, Gujarat

About the artisans

The Warlis are a tribal farming community settled in the Western Ghats. Despite their proximity to the bustling city of Mumbai, they maintain their tribal lifestyle and shy away from modern influences.

About the craft

Compared to the colorful and intricate designs seen in other Indian paintings, the tribal Warli paintings are rather simple yet vibrant. The simplicity of the art is observed in the predominant use of circles, triangles and squares, which are inspired from the surroundings – circles from the sun/moon, triangles from mountain tops and the square perhaps from a piece of land. The traditional Warli art uses only white color to paint over a brown background.

Warli painting themes are centred primarily on nature, folklore, farming, hunting, festivals, weddings and celebrations. These paintings clearly reflect the Warli peoples’ deep relationship with nature. The paintings are adorned by rustic landscapes and include rivers, trees, hills, farms, birds and animals. Squirrels, snakes, tigers and peacocks are commonly sighted in this art. Some artists now also incorporate modern elements such as bicycles, trains, factories etc.

Below is a traditional Warli painting done on a wall on the occasion of a marriage. At the center of this sacred painting, enshrined in a square is Palghat Devi, their marriage god.

Input materials

Cloth/paper/wood, Cow dung, Mud, Fevicol/glue, Poster paint or acrylic paint Traditionally, bamboo sticks were sharpened and used as brushes. Now, many artists use the common painting brush.

Process
For traditional Warli paintings, the wall surface is first smeared with cow dung and then a layer of red mud is applied. This is then painted upon with rice paste for the white colour.

For commercial purpose, painting on cloth and paper was introduced in the 1970s. To suit these new materials, the rice paste was substituted by poster paints (rice paste dries up and flakes off cloth surface).
First the background colour is prepared – for different background colours, different inputs are mixed with glue. Mud is used for a reddish background, charcoal powder for a black background, and cow dung for a brown background. Interestingly, the mix using cow dung gives varied shades depending on the seasons. During summer, the grass is dry and hence the cow dung color obtained is light brown.

Once the background colour dries, the artist lets his Warli figurines, landscapes and imagination run wild across the piece of paper or cloth.

Warli paintings are also done on wooden products such as pen stands and coasters. For this, the wood is first cut out in the shape of the product.

 

Then, a layer of acrylic paint is applied as the background colour. Wooden Warli artists don’t usually adhere to traditional colours and play with newer and brighter colours. Once this dries, white poster paint is used to draw the Warli designs. Later, a coat of varnish is applied and the product is left to dry.
  

Caring for the Product

Frame your painting to protect it from damage. In case of wooden Warli products, avoid prolonged exposure to water.

Problems plaguing artisans

Fakes/replicas of Warli paintings and products sold at a cheaper rate are affecting the Warli artists along with the demand for genuine tribal crafts.

Crafting Arth’s Logo

Arth’s logo was designed in collaboration with our Warli tribal artist, Sadashiv Mashe. Warli craft resembles ancient cave paintings and is characterised by simple triangles, circles and squares. The traditional colour used is white painted over a reddish-brown background.

We described the idea behind Arth to Mr. Mashe, explaining our emphasis on grassroot artisans and on elucidating the story of crafts in terms of its history and process. After discussing ideas, in a few quick flicks of his wrist, Mr Mashe drew us an elaborate Arth story:

He portrays the craftsman holding up his treasured crafts like a beacon for the world to see. It also signifies the propagation of age-old crafts as it is passed on from one generation to another. The artisan and his craft are encircled in nature, emphasizing on the use of natural products available in surrounding regions. The crafts are ubiquitous like the ants, says Mashe. “Ah, such beauty!” exclaims an appreciator of crafts.

We decided to carve our logo out of this, focusing on the artisan in the portrayal.

Mr. Mashe first prepared the background colour, which took forever to dry in the monsoon. So we threw in a fan and some lungpower.
 
Once dry, the Warli figure of the artisan was painted over. Watch our making of the logo video.  http://www.youtube.com/watch?v=rjf02nk9mow
Painted in earthy tones, we loved the simplicity of the idea. We added a few finishing touches to our raw Warli design.. and voila, logo ready!